Skip to content
PracticeTestHQ

Missouri permit test: passing, highways and work zones

Passing and being passed, slow traffic, controlled-access highways, interchanges and work zones. 14 questions, 10 at a time, starting with ones you haven't seen.

Study this topic as flashcards

Rules to remember10 key passing, highways and work zones rulesShow the rules
  1. Missouri allows passing on the right on a one-way street, as well as around a vehicle turning left and on wide multi-lane roads. (p. 24)
  2. You may not drive on the left side of the road when approaching within 100 feet of, or at, any intersection or railroad grade crossing. (p. 24)
  3. Do not pass any vehicle in a funeral procession except where a passing lane has been specially provided. (p. 36)
  4. When being passed, stay in your lane and do not increase your speed. (p. 40)
  5. If you can't see the truck driver's face in the side mirror, the driver can't see you. (p. 40)
  6. Use the ramp and acceleration lane to reach the speed of highway traffic, watch for a gap, signal and pull in smoothly. (p. 41)
  7. Stop on the shoulder only in an emergency, and turn on your emergency flashers. (p. 41)
  8. If you miss your exit, do not stop, back up, or turn around on the highway. (p. 41)
  9. In a Diverging Diamond Interchange you travel on the left side of the roadway for a short distance. (p. 42)
  10. At a flagging operation, be prepared to stop as you approach and follow the flagger's instructions. (p. 55)

Taken from the explanations to checked practice questions; page numbers link to the official handbook.

Loading questions…

Sample passing, highways and work zones questions

  1. 1.You are passing a large truck. How do you know when it is safe to move back in front of it?

    • AWhen you are one car length ahead
    • BWhen its cab shows in your mirror
    • COnce your bumper clears its front
    • DWhen the truck driver flashes lights
    Show the answer

    ✓ B. When its cab shows in your mirror

    Passing a truck takes longer. Before moving back in, make sure you can see the truck's cab in your rearview mirror, and don't slow down once in front.

    Source: Missouri Driver Guide (Revised August 2026), page 40

  2. 2.You are driving through a Diverging Diamond Interchange (DDI). What may surprise you?

    • AYou drive on the left side for a bit
    • BTrucks are not allowed to use it
    • CYou must stop at every ramp
    • DThere are no signs to guide you
    Show the answer

    ✓ A. You drive on the left side for a bit

    In a Diverging Diamond Interchange you travel on the left side of the roadway for a short distance. Follow the directional signs.

    Source: Missouri Driver Guide (Revised August 2026), page 42

  3. 3.Your car breaks down on the highway and you stop on the shoulder. What should you do to warn other drivers?

    • ATurn on your emergency flashers
    • BFlash your high beams at oncoming cars
    • CStand in the travel lane waving
    • DLeave your lights off to save the battery
    Show the answer

    ✓ A. Turn on your emergency flashers

    Stop on the shoulder only in an emergency, and turn on your emergency flashers. Raising the hood or tying a white cloth to the antenna also helps.

    Source: Missouri Driver Guide (Revised August 2026), page 41

  4. 4.Another vehicle starts to pass you. What should you do?

    • AStay in your lane at your speed
    • BBrake hard to let them by
    • CSpeed up so they can't cut in
    • DMove over onto the shoulder
    Show the answer

    ✓ A. Stay in your lane at your speed

    When being passed, stay in your lane and do not increase your speed.

    Source: Missouri Driver Guide (Revised August 2026), page 40