Utah permit test: road signs
Guide, railroad, regulatory, route, warning and work zone signs. 39 questions, 10 at a time, starting with ones you haven't seen.
Rules to remember10 key road signs rulesShow the rules
- A red circle with a red slash across the symbol means you may not do the action shown. (p. 57)
- A Do Not Enter sign means you may not drive into that road from your direction. (p. 57)
- A U-shaped arrow with a red slash means U-turns are not allowed. (p. 57)
- The white X-shaped crossbuck warns that a train or railroad vehicle may be coming and that you must be ready to stop. (p. 57)
- When crossing railroad tracks, look both ways and cross quickly; never stop on the tracks. (p. 57)
- The red, white and blue shield marks an interstate route. (p. 57)
- The pedestrian crossing sign warns that people may be crossing the road ahead. (p. 58)
- Warning signs are usually diamond-shaped and yellow with black lettering or symbols. (p. 58)
- A flagger may direct traffic in a work zone, and you must do as the flagger directs. (p. 59)
- If there is a short-term signal in a work zone, stop at the white line if one is painted. (p. 59)
Taken from the explanations to checked practice questions; page numbers link to the official handbook.
Sample road signs questions
1.What does this sign mean?
- AAn emergency vehicle station
- BA railroad crossing is ahead
- CA traffic signal is ahead
- DA school zone begins
Show the answer
✓ C. A traffic signal is ahead
This warning sign shows a traffic light symbol, meaning a traffic signal is ahead.
Source: Utah Driver Handbook (AAMVA Model Non-Commercial) 2026 (2026), page 58
2.What does this sign mean?
- AA school crossing guard
- BA pedestrian crossing
- CA flagger is ahead in a work zone
- DRoad closed ahead
Show the answer
✓ C. A flagger is ahead in a work zone
This orange work zone sign warns that a flagger is ahead directing traffic.
Source: Utah Driver Handbook (AAMVA Model Non-Commercial) 2026 (2026), page 59
3.A crossing has two sets of tracks, but no sign shows the number of tracks. What should you do?
- ALook for trains on every track anyway
- BCross without looking if the gate is up
- CWatch only the nearest track
- DAssume there is only one track
Show the answer
✓ A. Look for trains on every track anyway
Not every multi-track crossing is signed, so always look for multiple tracks, trains or railroad vehicles at every crossing.
Source: Utah Driver Handbook (AAMVA Model Non-Commercial) 2026 (2026), page 57
4.What does this sign mean?
- AA divided highway ends ahead
- BA divided highway begins ahead
- CA road crosses ahead
- DA lane ends ahead
Show the answer
✓ B. A divided highway begins ahead
This sign warns that a divided highway begins ahead, with traffic separated by a median.
Source: Utah Driver Handbook (AAMVA Model Non-Commercial) 2026 (2026), page 58