Skip to content
PracticeTestHQ

Idaho permit test: intersections, turns and right-of-way

Intersections, turns, keeping right, right-of-way and yielding, and pedestrians. 31 questions, 10 at a time, starting with ones you haven't seen.

Study this topic as flashcards

Rules to remember10 key intersections, turns and right-of-way rulesShow the rules
  1. You must follow any directions issued by a school safety patrol official while driving. (p. 48)
  2. Never shift gears while driving through a railroad crossing, because the vehicle may stall on the tracks. (p. 61)
  3. You must never drive through, under or around a railroad crossing gate that is lowered or being lowered. (p. 61)
  4. Some buses and trucks are required to stop at every railroad crossing, so be ready to stop behind them. (p. 61)
  5. A roundabout is a one-way circle. (p. 62)
  6. In a roundabout, all drivers must yield the right-of-way to vehicles already in the circle, which come from your left. (p. 62)
  7. On freeways and highways, signal at least five seconds before you turn or change lanes. (p. 72)
  8. At a four-way stop, the first vehicle to arrive goes first. (p. 75)
  9. At an uncontrolled intersection, if two vehicles arrive together, the vehicle on the left must yield to the vehicle on the right. (p. 75)
  10. Drivers must yield to pedestrians in marked or unmarked crosswalks, and always to a blind person with a white cane or guide dog. (p. 75)

Taken from the explanations to checked practice questions; page numbers link to the official handbook.

Loading questions…

Sample intersections, turns and right-of-way questions

  1. 1.About how far does a 150-car freight train going 50 mph need to stop?

    • AAbout 1/4 mile
    • BAbout 1 1/3 miles
    • CAbout 1,000 feet
    • DAbout 500 feet
    Show the answer

    ✓ B. About 1 1/3 miles

    A 150-car freight train at 50 mph needs about 7,000 feet (1 1/3 miles) to stop, so it is up to you to stay clear.

    Source: Idaho Driver's Handbook (July 2026), page 60

  2. 2.You are following a bus toward a railroad crossing. What should you be ready for?

    • AThe bus stopping at the crossing
    • BThe bus pulling onto the shoulder
    • CThe bus speeding up to cross
    • DThe bus turning before the tracks
    Show the answer

    ✓ A. The bus stopping at the crossing

    Some buses and trucks are required to stop at every railroad crossing, so be ready to stop behind them.

    Source: Idaho Driver's Handbook (July 2026), page 61

  3. 3.A person using a white cane is about to cross the street at a corner with no marked crosswalk. What must you do?

    • AHonk so the person knows you are there
    • BDrive around the person slowly
    • CGo first, since there is no crosswalk
    • DYield to the person
    Show the answer

    ✓ D. Yield to the person

    Drivers must yield to pedestrians in marked or unmarked crosswalks, and always to a blind person with a white cane or guide dog.

    Source: Idaho Driver's Handbook (July 2026), page 75

  4. 4.You are driving a car with a manual transmission over a railroad crossing. What should you avoid?

    • AListening for a train whistle
    • BShifting gears on the tracks
    • CKeeping a steady, low speed
    • DLooking both ways at the tracks
    Show the answer

    ✓ B. Shifting gears on the tracks

    Never shift gears while driving through a railroad crossing, because the vehicle may stall on the tracks.

    Source: Idaho Driver's Handbook (July 2026), page 61